Aluminum extrusion machine heater pipe purchasing guide
Aluminum extrusion machine heater pipe purchasing guide
Here are some tips for your aluminum extrusion machine heater pipe purchasing guide:
1.Voltage and power:
The voltage is determined according to the wiring method and the rated voltage; the power is determined according to the heating medium and size, and the sales staff can be consulted for details.
2.Pipe diameter
Generally 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, etc.
3. Unilateral length
Whether the length of the fastener thread is included.
4. Does it contain fasteners, if with fasteners, what is the fastener size and thread length?
5.Center distance:
Generally, the pipe diameter is 8mm, the center distance is at least 30mm, the pipe diameter is 10mm, the center distance is at least 40mm, the pipe diameter is 12mm, the center distance is at least 50mm, the pipe diameter is 16mm, the center distance is at least 70mm, the pipe diameter is 20mm The center distance must be at least 90mm. The above data is for reference only.
6.Appearance material selection:
The main materials are 10 # carbon steel, SUS304, SUS321, SUS316L, stainless steel with the coating (waterproof scale treatment), SUS310S (commonly known as 2520), titanium tube, etc.
7.Material selection of electric heating wire:
Generally iron-chrome-aluminum wire, nickel-chrome wire (generally H140, 2080 resistance wire, etc.) The choice of these two depends on the customer’s working environment (temperature and vibration).
